Download and upload time calculator
A 10 GB download takes 13 minutes 20 seconds at a steady 100 Mbps. Sending the same file over a 20 Mbps upload takes 1 hour 6 minutes 40 seconds. To estimate your own transfer, match the file size to the speed available in the direction the data is traveling.
Loading the tool…
What does bps mean? How do Mbps and MB/s compare?
bps means bits per second. Internet plans commonly use kbps (thousands of bits per second), Mbps (millions) or Gbps (billions). A file manager may report bytes per second instead. The capital B matters because one byte contains eight bits.
Divide Mbps by 8 to get MB/s. Multiply MB/s by 8 to get Mbps. A download running at 12.5 MB/s is already receiving 100 Mbps of file data. The same rule works with matching prefixes, so 800 kbps equals 100 kB/s. When the prefixes differ, convert them first: 1 Gbps is 1,000 Mbps, or 125 MB/s.
How many MB are in a GB? What changes with GiB?
The decimal units kB, MB, GB and TB grow by a factor of 1,000 at each step. Their binary counterparts KiB, MiB, GiB and TiB grow by 1,024. Both systems count the same bytes.
| Decimal file size | Binary file size at the same prefix level |
|---|---|
| 1 kB = 1,000 bytes | 1 KiB = 1,024 bytes |
| 1 MB = 1,000,000 bytes | 1 MiB = 1,048,576 bytes |
| 1 GB = 1,000 MB | 1 GiB = 1,024 MiB |
| 1 TB = 1,000 GB | 1 TiB = 1,024 GiB |
To convert GiB to GB, multiply by 1.073741824. Divide by the same number to go back. A 100 GB archive is about 93.13 GiB whichever display you use. The distinction also applies to speed: 1 MiB/s carries 1,048,576 bytes each second, or about 8.39 Mbps.
How long does it take to download or upload a file?
Time in seconds = remaining size in MB × 8 ÷ sustained speed in Mbps. For example, a 750 MB video contains 6,000 megabits. At 20 Mbps upstream, the upload takes 300 seconds, or 5 minutes.
| Example transfer | File size | Sustained speed | Transfer time |
|---|---|---|---|
| Send a photo attachment | 5 MB | 2 Mbps up | 20 seconds |
| Upload a video for review | 750 MB | 20 Mbps up | 5 minutes |
| Download a system image | 4 GiB | 8 MiB/s down | 8 minutes 32 seconds |
| Download a game | 100 GB | 100 Mbps down | 2 hours 13 minutes 20 seconds |
| Send the first full backup | 1 TB | 20 Mbps up | 4 days 15 hours 6 minutes 40 seconds |
These examples assume uninterrupted transfers at the stated speeds. For a large game such as GTA 6, the relevant figure is the download size shown by the console. Installed size can include unpacked files, and installation adds time after the data arrives.
Why does a transfer take longer than the connection speed suggests?
On a plan advertised as 100 Mbps down / 20 Mbps up, downloads can use the first rate and cloud backups the second. DSL and cable plans often have different rates in each direction. Fiber plans can be symmetric. With 4G, 5G or satellite access, signal conditions and network load can change the rate during a transfer. The connection names above provide example rates for planning. Your own plan or a sustained measurement gives a more useful baseline.
A line also carries protocol headers, and your file shares the connection with other traffic. If 80 Mbps of a 100 Mbps line is available for file data, the 10 GB download takes 16 minutes 40 seconds. If the application already reports the actual file speed, use that value directly. Applying a second overhead allowance would count the slowdown twice.
For web assets, the size that crosses the network can be smaller than the decoded resource. The guide to inspecting browser network requests shows where to inspect transfers. The HTML minifier shows how much source markup you can remove before compression.
How much time is left on a transfer already in progress?
Suppose a backup reaches 25% in 5 minutes. The remaining 75% is three times the portion already sent, so allow 15 more minutes at that pace. In general, multiply elapsed time by the remaining percentage and divide by the completed percentage. This works when progress measures bytes and some data has already transferred. Pauses, changing speeds and progress based on file count can skew the estimate.
If you need to give someone overseas a delivery time, convert the estimated finish time to their local time with the universal time converter.
Enter the total file size and choose a measured speed or a connection profile. Adjust Already transferred and Usable bandwidth with the sliders, or click either underlined percentage to enter an exact value. Use 100% bandwidth for a measured file speed. Press Enter to apply or Escape to cancel. For an active transfer, choose Estimate speed from my transfer progress and enter the elapsed minutes. Copy estimate includes the remaining duration, estimated local finish time and unit conversions. This tool processes your data on your device. The text, files, or passwords you enter and the results it creates are not sent to our servers or any other server. Page and asset requests still occur. Production pages also load Google Tag Manager, Cloudflare Web Analytics, and AdSense advertising; tool code does not send inputs or results to analytics or ads. See our privacy policy. To inspect requests while using the tool, open your browser's developer tools and select Network. Try it with sample data. Read How to Check Website Network Requests in Chrome, Firefox, Edge and Safari.How to use this tool
Your tool data stays in your browser
Unit references
- NIST’s table of binary prefixes gives exact bit, byte, decimal and binary equivalents.
- MDN’s bandwidth glossary explains how connection capacity is expressed in bits per second.